Some (not an exhaustive list!) of our published journal papers are listed here:
2017
J175
Xiang Lin, Lili Fan, Dongyun Ren, Zhiwei Jiao, Phil Coates, Weimin Yang
Enhanced dielectric properties of immiscible poly (vinylidene fluoride)/low density polyethylene blends by inducing multilayered and orientated structures Composites Part B Engineering February 2017 DOI: 10.1016/j.compositesb.2017.01.065 2017
J176
Yulia Ryabenkova, Niten Jadav, Marco Conte, Michael F. A. Hippler, Nik Reeves-McLaren, Phil D. Coates, Peter Twigg, and Anant Paradkar, Mechanism of Hydrogen-Bonded Complex Formation between Ibuprofen and Nanocrystalline Hydroxyapatite, Langmuir, in press, DOI: 10.1021/acs.langmuir.6b04510 2017
J177
Li, Z., Ye, L., Zhao, X., Coates, P., Caton-Rose, F., & Martyn, M. Structure and biocompatibility of highly oriented poly(lactic acid) film produced by biaxial solid hot stretching, Journal of Industrial and Engineering Chemistry (IF: 4.421), 2017, 52, 338-348.
J178
Li, J., Li, Z., Ye, L., Zhao, X., Coates, P., Caton-Rose, F., & Martyn, M. Structure evolution and orientation mechanism of long-chain-branched poly (lactic acid) in the process of solid die drawing, European Polymer Journal (IF: 3.684), 2017, 90, 54-
2016
Li Z, Ye L, Zhao X, Coates P, Caton-Rose F, Martyn M.
High orientation of long chain branched poly (lactic acid) with enhanced blood compatibility and bionic structure. J Biomed Mater Res Part A 2015:00A:000–000. DOI: 10.1002/jbm.a.35640 2016
J174
Xiang Lin, Jie-Wei Tian, Peng-Hao Hu, Rohan Ambardekar, Glen Thompson, Zhi-Min Dang, Phil Coates
Improved dielectric performance of polypropylene/multiwalled carbon nanotube nanocomposites by solid-phase orientation Journal of Applied Polymer Science. 133 (3) 42893 DOI: 10.1002/app.42893 2016
2015
J169
Jiajia Xue, Rui Shi, Yuzhao Niu, Min Gong, Phil Coates, Aileen Crawford, Dafu Chen, Wei Tian, Liqun Zhang Fabrication of drug-loaded anti-infective guided tissue regeneration membrane with adjustable biodegradation property Colloids and Surfaces B: Biointerfaces,18March. Impact Factor: 4.287 DOI: 10.1016/j.colsurfb.2015.03.031, 2015
J170
Li, Zhengqiu ; Zhao, Xiaowen ; Ye, Lin ; Coates, Phil ; Caton-Rose, Fin ; Martyn, Michael, Structure and blood compatibility of highly oriented poly(l-lactic acid) chain extended by ethylene glycol diglycidyl ether Polymer; 56; 523-534; Impact Factor: 3.766 DOI: 10.1016/j.polymer.2014.11.035, 2015
J171
Zhengqiu Li, Xiaowen Zhao, Lin Ye, Phil Coates, Fin Caton-Rose, Michael Martyn
Fibrillation of Chain branched Poly (lactic acid) with Improved Blood Compatibility and Bionic Structure, Chemical Engineering Journal 279 (2015) 767–776, DOI: 10.1016/j.cej.2015.05.082
J172
Yunyun Gao, Xia Dong, Lili Wang, Guoming Liu, Xianggui Liu, Cristina Tuinea-Bobe, Ben Whiteside, Phil Coates, Dujin Wang, Charles C. Han Flow-induced crystallization of long chain aliphatic polyamides under a complex flow field: Inverted anisotropic structure and formation mechanism, Polymer; 73, 91-101; 2015 DOI: 10.1016/j.polymer.2015.07.029
J173
Li, D., Fei, G., Xia, H., Spencer, P. E. and Coates, P. D.
Micro-contact reconstruction of adjacent carbon nanotubes in polymer matrix through annealing-Induced relaxation of interfacial residual stress and strain, J. Appl. Polym. Sci., 132 (33), 42416, 2015DOI: 10.1002/app.42416 2015
2014
J150
Al-Lamee, K. G.; Coates, P. D.; Caton-Rose, P.; et al. Bio-resorbable coronary stents: current developments and future opportunities JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE Volume: 8 Special Issue: SI Supplement: 1 Pages: 183-183. Impact Factor: 4.428; Published online in Wiley Online Library (wileyonlinelibrary.com) DOI: 10.1002/term.1931, 2014
J151
X Lin, A Kelly, M Woodhead, D-Y Ren, K-S Wang, P D Coates. Capillary Study on Geometrical Dependence of Shear Viscosity of Polymer Melts Journal of Applied Polymer Science (Impact Factor: 1.4). 03/2014; 131(6). DOI: 10.1002/APP.39982, 2014
J152
Jiajia Xue, Min He, Hao Liu, Yuzhao Niu, Aileen Crawford, Phil D Coates, Dafu Chen, Rui Shi, Liqun Zhang Drug loaded homogeneous electrospun PCL/gelatin hybrid nanofiber structures for anti-infective tissue regeneration membranes Biomaterials (Impact Factor: 8.31). 08/2014; 35(34):9395-9405. DOI: 10.1016/j.biomaterials.2014.07.060, 2014
J153
Wenting Bao, Hong Wu, Shaoyun Guo, Anant Paradkar, Adrian Kelly, Elaine Brown, Phil Coates Effect of Ultrasound on Molecular Structure Development of Polylactide Polymer-Plastics Technology and Engineering (Impact Factor: 1.48). 06/2014; 53(9):927-934. DOI: 10.1080/03602559.2014.886062, 2014
J154
Chen Zhang, Xiujuan Jiang, Zhiyang Zhao, Lixin Mao, Liqun Zhang, Phil Coates Effects of wide-range γ-irradiation doses on the structures and properties of 4,4′-dicyclohexyl methane diisocyanate based poly(carbonate urethane)s Journal of Applied Polymer Science (Impact Factor: 1.4). 11/2014; 131(22): 41049. DOI: 10.1002/app.41049 , 2014
J155
Jing Deng, Kang Li, Eileen Harkin-Jones, Mark Price, Nayeem Karnachi, Adrian Kelly, Javier Vera-Sorroche, Phil Coates, Elaine Brown, Minrui Fei Energy monitoring and quality control of a single screw extruder Applied Energy 01/2014; Volume 113:1775–1785; Impact Factor: 5.261 DOI: 10.1016/j.apenergy.2013.08.084., 2014
J156
Xue, J.; He, M.; Liang, Y.; Crawford, A.; Coates, P.D.; Chen, D.; Shi, R.; Zhang, L. Fabrication and evaluation of electrospun PCL-gelatin micro-/nano-fiber membranes for anti-infective GTR implants Journal of Materials Chemistry B, 2(39): 6867-6877. DOI: 10.1039/C4TB00737A, 2014
J157
Xue Li, Hailan Kang, Jianxiang Shen, Liqun Zhang, Toshio Nishi, Kohzo Ito, Changming Zhao, Phil Coates Highly Toughened Polylactide with Novel Sliding Graft Copolymer by in Situ Reactive Compatibilization, Crosslinking and Chain Extension Polymer. 01/2014; Vol. 55, No. 16, pp. 4313-4323. Impact Factor: 3.766 DOI: 10.1016/j.polymer.2014.06.045, 2014
J158
Michael T. Martyn, P.D. Coates, M Zatloukal Influence of coextrusion die channel height on the interfacial instability of low density polyethylene melt flow Plastics Rubber and Composites (Impact Factor: 0.63). 02/2014; 43(1):25-31. DOI: 10.1179/1743289813Y.0000000065, 2014
J159
J. Vera‐Sorroche, A.L. Kelly, E.C. Brown, P.D. Coates Infrared melt temperature measurement of single screw extrusion Polymer Engineering and Science 07/2014; 55(5): 1059-1066. Impact Factor: 1.441 DOI: 10.1002/pen.23976, 2014
J160
Abeykoon C., Kelly A.L., Vera-Sorroche J., Brown E.C., Coates P.D., Howell K.B., Deng J., Li K. and Harkin- Jones E., Price M. Investigation of the Process Energy Demand in Polymer Extrusion: A Brief Review and an Experimental Study Applied Energy,136: 726-737, Impact Factor: 5.261 DOI: 10.1016/j.apenergy.2014.09.024, 2014
J161
Chamil Abeykoon, Peter J. Martin, Adrian L. Kelly, Kang Li, Elaine C. Brown, Phil D. Coates Investigation of the temperature homogeneity of die melt flows in polymer extrusion, Polymer Engineering and Science (Impact Factor: 1.24). 10/2014; 54(10):2430-2440. DOI: 10.1002/pen.23784, 2014
J162
Jing Deng, Kang Li, Eileen Harkin-Jones, Mark Price, Minrui Fei, Adrian Kelly, Javier Vera-Sorroche, Phil Coates, Elaine Brown Low-cost process monitoring for polymer extrusion, Transactions of the Institute of Measurement and Control (Impact Factor: 0.66); 36(3):382-390. DOI: 10.1177/0142331213502696, 2014
J163
Abeykoon, C.; Martin, P.J.; Kelly, A.L.; Li, K.; Brown, E.C.; Coates, P.D. Melt temperature consistency during polymer extrusion Plastics Research Online: DOI: 10.2417/spepro.005245, 2014
J164
C. Abeykoon, A. L. Kelly, J. Vera-Sorroche, E. C. Brown, P. D. Coates, J. Deng, K. Li, E. Harkin-Jones, M. Price Optimization of Process Efficiency in Polymer Extrusion: Correlations between the Energy Demand and Melt Thermal Stability Applied Energy. Impact factor 5.26. DOI: 10.1016/j.apenergy.2014.08.086, 2014
J165
Jiajia Xue, Min He, Yuzhao Niu, Hao Liu, Aileen Crawford, Phil Coates, Dafu Chen, Rui Shi, Liqun Zhang Preparation and in vivo efficient anti-infection property of GTR/GBR implant made by metronidazole loaded electrospun polycaprolactone nanofiber membrane International Journal of Pharmaceutics, Volume 475, Issues 1–2, 20 November 2014, Pages 566-577. Impact Factor: 3.785 DOI: 10.1016/j.ijpharm.2014.09.026, 2014
J166
J167
Z-Q Li, X-W Zhao, L Ye, P D Coates, F Caton-Rose, M Martyn. Structure and blood compatibility of highly oriented PLA/MWNTs composites produced by solid hot drawing Journal of Biomaterials Applications (Impact Factor: 2.64). 03/2014; 28(7):978-989. DOI: 10.1177/0885328213490047 , 2014
J168
Vera-Sorroche, Javier; Kelly, Adrian L.;Brown, Elaine C; Gough, Tim; Abeykoon, Chamil; Coates, Phil D.; Deng, Jing; Li, Kang; Harkin-Jones, Eileen; Price, Mark The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE Chemical Engineering Research and Design; 92, 11; 2404-2412; Impact Factor: 2.281 DOI: 10.1016/j.cherd.2013.12.025, 2014
2013
J140
Colin A. Grant, Abdulrahman Al-Fouzan, Tim Gough, Peter C. Twigg, Phil D Coates Nano-scale temperature dependent visco-elastic properties of polyethylene terephthalate (PET) using atomic force microscope (AFM), Micron 2013, 44, 174-178 http://dx.doi.org/10.1016/j.micron.2012.06.004
J141
H Kang, B Qiao, R Qang, Z W Qang, L Zhang, J Ma, P D Coates, Employing a novel bioelastomer to toughen polylactide, Polymer, doi: http://dx.doi.org/10.10.16 /j.polymer.2013.02.053 (2013)
J142
G-X Fei, C Tuinea-Bobe, D-X Li, G Li, B Whiteside, P D Coates and H-S Xia, Electro-activated surface micropattern tuning for microinjection molded electrically conductive shape memory polyurethane composites RSC Advances (Impact Factor: 3.71). 12/2013; 3(46):24132-24139. DOI: 10.1039/C3RA43640C 2013
J143
X Lin, A Kelly, D-Y Ren, M Woodhead, P D Coates, K-S Wang. Geometrical Dependence of Viscosity of Polymethylmethacrylate Melt in Capillary Flow Journal of Applied Polymer Science (Impact Factor: 1.4). 12/2013; 130(5):3384-3394. DOI: 10.1002/APP.39591 2013
J144
M. T. Martyn, P. D. Coates Pressure Variation during Interfacial Instability in the Coextrusion of Low Density Polyethylene Melts International Polymer Processing, Journal of the Polymer Processing Society 11/2013; 28(5):516-527. · 0.68 Impact Factor DOI: 10.3139/217.2786 2013
J145
Coates P D., Caton-rose P., Ward I M, Thompson G. Process structuring of polymers by solid phase orientation processing Science China-Chemistry 05/2013; 56(8): 1017–1028.• 1.52 Impact Factor DOI: 10.1007/s11426-013-4881-1 2013
J146
X Lin, F Caton-Rose, D-Y Ren, K-S Wang, P D Coates. Shear-induced crystallization morphology and mechanical property of high density polyethylene in micro-injection molding Journal of Polymer Research; 20(4):122-131. • 1.90 Impact Factor DOI: 10.1007/s10965-013-0122-8 2013
J147
X-W Zhao, L Ye, P D Coates, F Caton-Rose, M Martyn. Structure and blood compatibility of highly oriented poly(lactic acid)/thermoplastic polyurethane blends produced by solid hot stretching Polymers for Advanced Technologies 09/2013; 24(9): 853-860. • 1.96 Impact Factor DOI: 10.1002/pat.3156 2013
J148
Z-Y Jiang, Y-T Wang, L-L Fu, B Whiteside, J Wyborn, K Norris, Z-H Wu, P D Coates, and Y-F Men. Tensile Deformation of Oriented Poly(ε-caprolactone) and Its Miscible Blends with Poly(vinyl methyl ether) Macromolecules, Vol. 46, No. 17, pp. 6981−6990; Impact Factor 5.927.DOI: 10.1021/ma401052x. 2013
J149
Javier Vera-Sorroche, Adrian Kelly, Elaine Brown, Phil Coates, Nayeem Karnachi, Eileen Harkin-Jones, Kang Li, Jing Deng Thermal optimisation of polymer extrusion using in-process monitoring techniques Applied Thermal Engineering 05/2013; 53(2):405–413; Impact Factor: 2.624 DOI: 10.1016/j.applthermaleng.2012.04.013. 2013
2012
J138
G. S. Ezat, A. L. Kelly, S. C. Mitchell, M. Youseffi, P. D. Coates Effect of maleic anhydride grafted polypropylene compatibilizer on the morphology and properties of polypropylene/multiwalled carbon nanotube composite Polymer Composites 08/2012; 33(8): 1376-1386; 1.48 Impact Factor DOI: 10.1002/pc.22264; 2012
J139
Wei T, Lei L, Kang H, Qiao B, Wang Z, Zhang L, Coates P D, Hua K-C, Kulig J Tough Bio-based Elastomer Nanocomposites with High Performance for Engineering Application.Advanced Engineering Materials,14, Nos1-2, 112-118 DOI: 10.1002/adem.201100162 2012
2011
J135
A.L. Kelly, L. Mulvaney-Johnson, R. Beechey, P.D. Coates, The Effect of Copper Alloy Mold Tooling on the Performance of the Injection Molding Process, Polymer Eng Sci,, 51 (9) 1837–1847, 2011 DOI 10.1002/pen.21975
J136
T Wei, L Lei, H Kang, B Qiao, Z Wang, L Zhang, P D Coates, K-C Hua, J Kulig, Tough Bio-based Elastomer Nanocomposites with High Performance for Engineering Application, Advanced Engineering Materials,14, Nos1-2, 112-118, Feb 2012 DOI: 10.1002/adem.201100162
J137
P. Olley, L. Mulvaney-Johnson, and P.D. Coates Simulation of the gas-assisted injection moulding process using a viscoelastic extension to the Cross-WLF viscosity model. IMechE: Part E: Journal of Process Engineering, DOI: 10.1177/0954408911409134, 2011
Some of our publications, stretching back to 1978!
1978
J1
Coates P D and Ward I M, The plastic deformation behaviour of linear polyethylene and polyoxymethylene, J.Mater.Sci., 13, 1957- 1970 (1978)
J2
Coates P D and Ward I M, Hydrostatic extrusion of polyoxymethylene, J.Poly.Sci. Poly.Phys.Ed., 16, 2031- 2047 (1978)
1979
J3
Coates P D and Ward I M, Drawing of polymers through a conical die, Polymer, 20, 1553-1560 (1979)
1980
J4
Coates P D and Ward I M, Neck profiles in drawn linear polyethylene, J.Mater.Sci., 15, 2897-2914 (1980)
J5
Coates P D, Gibson A G and Ward I M, An analysis of the mechanics of solid phase extrusion of polymers, J.Mater.Sci., 15, 359-375 (1980)
1981
J6
Coates P D and Johnson A F, An introduction to reinforced reaction injection moulding, Plast.Rubb.Process.Applicn., 1, No.3, 223-238 (1981) [PRI Silver Medal Award]
J7
Coates P D and Ward I M, Die drawing: solid phase drawing of polymers through a converging die, Poly.Eng.Sci., 21, No.10, 612-618 (1981)
J8
Coates P D, Microprocessors in polymer processing machinery control, Plast. Rubb.Int., 6, No.1, 15-17 (1981)
1982
J9
Johnson A F and Coates P D, Reaction injection moulding reviewed, Shell Polymers, 7, No.3, 75-79 (1983)
1983
1984
J10
Coates P D, Microprocessors in polymer processing, Shell Polymers, 8, No.3, 69-73 (1984)
J10a
also,Coates P D, Il microcomputer nell'industria di trasformazione, Poliplasti, 329, 91-96 April (1985) [translation of no. J10]
1985
J11
Coates P D, Sivakumar A I and Johnson A F, RRIM: Process measurements on a computerised small scale machine, Poly.Process.Eng.,3,(1-2), 159-172 (1985)
1986
J12
Coates P D, Sivakumar A I and Johnson A F, RRIM: Computer control of injection, Plast. Rubb. Process. Applicn., 6, No.2, 141-151 (1986) [PRI Silver Medal Award]
J13
Coates P D, Sivakumar A I and Johnson A F, RRIM Machine and process measurements, Poly. Process Eng., 4, (2-4), 219-234 (1986)
J14
Coates P D, Sivakumar A I and Johnson A F, RRIM: Rheology of glass filled polyol slurries and polymeric isocyanate reagents, Plast. Rubb. Process. Applicn., 7, 19-28, (1986)
J15
Coates P D and Johnson A F, Developments in RRIM for increased processing flexibility, Plast. Rubb. Int. 11, No 6, 8-11, Dec.(1986)
1987
J16
Coates P D, Ellis D I and Pourmahnaei S M, Drawing of thick section polypropylene at high strain rates, Plast. Rubb. Process. Applicn., 8, 165-172 (1987)
J17
Coates P D, Johnson A F, Armitage P D, Hynds J and Leadbitter J, Computer controlled multiple stream reinforced RIM, Poly. Eng. Sci., 27, No 16, 1209-1215 (1987)
J18
Armitage P D, Coates P D, Hill S, Johnson A F, Mykytiuk J, Turner J M C, Free radically initiated polymerisation for RIM and RRIM, Makromol. Chem. Macromol.Symp. 10/11, 593-615 (1987)
J19
Coates P D and Johnson A F, Machine-materials interface in the RRIM process, Macplas, 116-119, (1987); also translated into Italian in Macplas 84, 103-107 (1987). [derived from no. 26]
J20
Coates P D, Johnson A F, Armitage P D, Hynds J and Leadbitter J, Novel Reinforced Reaction Injection Moulding (RRIM) Processing: Computer controlled multiple stream RRIM production of interpenetrating polymer networks and polyurethanes, Polym. Eng. Sci., mid-September, 27, No.16, 1209-1215 (1987)
1988
J21
Coates P D, Sivakumar A I and Johnson A F, RRIM: Experimental studies of flow transients in mixheads, Plast. Rubb. Process. Applicns, 8, 203-213 (1988)
J22
Coates P D, Sivakumar A I and Johnson A F, RRIM: Studies of steady injection flows in mixhead orifices, Plast. Rubb. Process. Applicns, 10, 27-33 (1988)
J23
Armitage P D, Coates P D and Johnson A F, Reinforced Reaction Injection Moulding, RAPRA Review Reports, 1, No 4, 1-81, Ed. R Meredith, 1988 (Pergammon Press)
1989
1990
J24
Ryan J, Coates P D, Johnson A F, Hynds J and Patrick P, Mould flows and post-mixhead rheology studies for poly(urethane-urea)s, Proc. Plast. Rubb. Process. Applicns, 13, No.2, 121-128 (1990)
J25
Coates P D, Optimal control of RIM mixing heads, Plast. Rubb. Process. Applicns, 13, No.2, 139-146 (1990)
J26
Coates P D, Reactive processing of polymers, Plast. Rubb. Process. Applicns, 13, No.2, 71-74 (1990)
J27
Coates P D and Johnson A F, Reactive processing of polymers for high performance products, High Performance Plastics, May 1990, 1-7 (Elsevier Science Ltd)
1991
J28
Coates P D, Analysis and Control of Polymer Processing, Polymer Processing, Structure and Properties, R & D Clearing House, May 1991.
1992
J29
Coates P D, Johnson A F, Long S D, Tucker N and Wong S, Structural Reaction Injection Moulding of Polyamide and Polyurethane matrix- organic fibre composites, Proc Utech 92, 305-308 Den Haag, Crain Communications, April 1992
J30
Coates P D and Johnson A F, Reactive Injection Processing of Polymers - Competitive Systems, Proc Utech 92 Seminar Series, Den Haag, Crain Communications, April 1992
1993
J31
Coates P D and Johnson A F, Reactive Processing of Polymers and Composites, Materials World, 1, No.3, 156-160 (1993)
RC48
Haynes A R and Coates P D, Image analysis of necking of polyolefins, Proc. PPS 9, April 1993
RC49
Day A J, Allport J M, Fischer W P, Coates P D and Mimaroglu, A, Finite element modelling of polymer deformation processes, Proc. Abaqus Users Conference, pp 151-164, Aachen, June 1993, HKS Inc., Rhode Island
J32
Butler R, Turner R, Coates P D, Pike R and Price D, Investing in New Technology for Competitive Advantage, Europ.Manag.J, 11, No.3, 367-376, Sept. (1993)
RC50
Coates P D In-line rheological measurements for extrusion process control, Proc. Control of Extruders, Inst. Measurement & Control, Sept. 1993
1994
J33
Coates P D, Intelligent Polymer Processing, Materials World, 2, No.1,10-13, Jan 1994
J34
Coates P D, Speight R G and Haynes A R, In line characterisation of polymer deformation in melt and solid phase processing, Polymer, 35, No 18, 3831-3843 (1994)
J35
Coates P D, Johnson A F, Tucker N and Wong S, Novel twin mixhead RIM for controlled property variation in processing Polyurethanes, Proc. UTECH 94, Paper 59/1-7, Crain Communcations, ISBN 1-85957-004-6, Den Haag (March 1994)
J36
Speight R G & Coates P D, Towards intelligent control of polymer injection moulding, AMST94, Ed. R Whalley, 365-378, Mechanical Engineering Publications Ltd, London, ISBN 0 85298 828 1, (March 1994)
J37
Brown M W R, Coates P D and Johnson A F, Reactive Processing of Polymers, RAPRA Review Reports 73 , Vol 7, No.1, pp1-136, 1994 (Pergammon Press) ISBN 1 85957 011 9
1995
J38
Coates P D, Rose R M and Wilkinson B, In-process measurements for monitoring and control of gelation levels in UPVC compounding, Plast.Rubb.Comp.Process.Applicn., 23, 295-303 (1995)
J39
Coates P D and Speight R G, Towards intelligent process control of injection moulding of polymers, Proc. I Mech E, part B, J. of Engineering Manufacture, Vol 209, 357-367 (1995)
*I Mech E Thatcher Bros Prize for best paper in Manufacturing.
J40
Long S D, Dawood I, Coates P D and Johnson A F, Influence of Reaction Injection moulding (RIM) processing variables on the mechanical properties of a commercial linear segmented polyamide, Plast.Rubb.Comp.Process.Applicn, 23, 161-174 (1995)
J41
Coates P D, In-line rheological measurements for extrusion process control, Measurement & Control, 28, No1, pp10-16 (February 1995)
J42
Speight R G, Yazbak E P and Coates P D, In-line pressure and infrared temperature measurements for injection moulding process control, SPE Tech Papers, XXXXI, 647-650 (1995)
J43
Coates P D, Brown M W R, Fleming D J, Johnson A F and Tsui S-W, Novel reactive extrusion functionalisation of polyolefins: in-process measurements SPE Tech Papers, XXXXI, 1620-1624 (1995)
J44
Coates P D, Davies G R, Duckett R A, Johnson A F, and Ward I M, Some routes for tailoring of polymer properties through processing, IChemE Transactions, ChERD, , 73, Part A, Special Edition on Materials, 753-770 (1995)
J45
Long S D, Coates P D, Johnson A F, Hine P J, Duckett R A and Ward I M, Structural reaction injection moulding of polyethylene fibre reinforced epoxy composites, Plast. Rubb. Process. Applicn, Plast. Rubb. Process. Applicn, Plast.Rubb.Process.Applicn, 24, No 5, 277-283 (1995)
1996
J46
Haynes A.R. and Coates P.D., Semi-Automated Image Analysis of the True Tensile Drawing Behaviour of Polymers to large strains, J Mater Sci, 31, 1843-1855 (1996)
J47
Groves D. J., McLeish T. C. B., Chohan R. K. and CoatesP. D. Predicting the Rheology of Linear with Branched Polyethylene Blends, Rheologica Acta 35, 481-493 (1996)
J48
Ward N J, Edwards H G M, Johnson A F, Fleming D J and Coates P D, Application of Raman Spectroscopy for determining residence time distributions in extruder reactors, Applied Spectroscopy, 50, No 6, 812-815 (1996)
J49
Butler R J, Coates P D, Pike R H, Price D H R and Turner R S, Competitive Strategies and new technology: an empirical investigation in the UK polymer processing industry, R&D Managment, 26, No 4, 335-343 (1996)
1997
J50
Kelly A L, Coates P D, Dobbie T W and Fleming D J,, On-line rheometry: shear & extensional flows, Plast.Rubb.Comp.Process.Applicn, 25,No 7,313-318 (1997)
J51
Olley P and Coates P D, An Approximation to the KBKZ Constitutive Equation, J Non Newt. Fluid Mech., 69, 239-254 (1997)
J52
Groves D J, Martyn M T and Coates P D, Off line and In-process converging flow measurements for polyolefin melts, Plastics Rubber & Composites Processing & Applications, 26, No.1, 13-22 (1997)
J53
Coates P D, Developments in Polymer Technology, Processing for China, 91-93 (1997)
J54
Speight R G, Coates P D, Hull J B and Peters C, In line process monitoring for injection moulding control, Proc I Mech E Part E, 211, 115-128 (1997)
J55
Sweeney J, Collins T L D, Coates P D, Unwin A P and Ward I M, Large deformations of semicrystalline polymer modeled using the necking network concept, ASME: J. Eng Matls Tech., 119, 228-232 (1997)
J56
Sweeney J, Collins T L D, Coates P D and Ward I M, Application of an elastic model to the large deformation, high temperature stretching of polypropylene, Polymer, 38, No24, 5991-5999 (1997).
J57
Hine P J, Tsui S-W, Coates P D, Ward I M and Duckett R A, Measuring the development of fibre orientation during the melt extrusion of short glass fibre reinforced polypropylene, Composites, part A, 28A, 949-958 (1997).
1998
J58
Coates P D, Rose R M, Woodhead M and Kelly A L, Sensitivity of in-line rheometry for extrusion of Mg(OH)2 filled LDPE compounds, Int.Poly.Process, XIII, No 2, 172-182, (1998)
J59
Khoshooee N and Coates P D, Application of Taguchi methods for consistent polymer melt production in injection moulding, Proc I Mech E, part B, J. Eng Manufacture, 212, 611-620, 1998
J60
Butler R J, Price D H R, Coates P D and Pike R H, Organizing for Innovation: Loose or Tight Control?, Long Range Planning, 31, No5, 775-782 (1998)
1999
J61
Brown E C, Collins T L D, Dawson A J, Olley P and Coates P D, Ultrasound: a virtual instrument approach for monitoring of polymer melt variables, J.Reinf.Plast.Comp., 18, 331-338 (1999)
J62
Olley P, Spares R, Coates P D, A method for implementing time-integral constitutive equations in commercial CFD packages, J Non Newtonian Fluid Mech, 86, 337-357 (1999)
2000
J63
Brown E C, Olley P, and Coates P D, In line melt temperature measurement during real time ultrasound monitoring of single screw extrusion, Plast.Rubb.Composites, 29, No.1, 3-13 (2000)
J64
Martyn M. T., Groves D. J., and Coates P. D., In process monitoring of apparent extensional viscosity of low density polyethylene melts using flow visualisation, Plast.Rubb.Composites, 29, No.1, 14-22 (2000)
J65
Kelly A. L., Woodhead M., Rose R. M., and Coates P. D., In process monitoring of polymer batch to batch variation in injection moulding, Plast.Rubb.Composites, 29, No.1, 23-30 (2000)
J66
Johnson L., Olley P., and Coates P. D., Gas assisted injection moulding: Finite element modelling and experimental validation, Plast.Rubb.Composites, 29, No.1, 31-37 (2000)
J67
Whiteside B. R., Coates P. D., Hine P. J., and Duckett R. A., Glass fibre orientation within injection moulded automotive pedal: Simulation and experimental studies, Plast.Rubb.Composites, 29, No.1, 38-45 (2000)
J68
Taraiya A. K., Nugent M., Sweeney J., Coates P. D., and Ward I. M., Development of continuous die drawing production process for engineered polymer cores for wire ropes, Plast.Rubb.Composites, 29, No.1, 46-50 (2000)
J69
Caton-Rose P., Sweeney J., Collins T. L., and Coates P. D., Finite element simulation of geogrid manufacture using large deformation elastic formulation, Plast.Rubb.Composites, 29, No.1, 51-58 (2000)
J70
Nakason C,Martyn M T, Coates P D, Flow visualisation of polymer melts in abrupt contraction extrusion dies: quantification of melt recirculation and flow patterns, J Non Newtonian Fluid Mech, , 91, 109-122 (2000)
J71
Martyn M T, Nakason C, Coates P D, Stress measurements for contraction flows of viscoelastic polymer melts, J Non Newtonian Fluid Mech, 91, 123-142 (2000)
J72
Martyn M.T., Nakason C. & Coates P.D., Measurement of apparent extensional viscosities of polyolefin melts from real process contraction flows, J Non Newtonian Fluid Mech, 92, 203-226 (2000)
J73
Speight R G, Rose R M and Coates P D, Infrared Sensor melt temperature measurement technology and benefits for thermoplastic injection moulding process control, J. Inj Mould., 3, no 4, 159-180 (1999)
J74
Kelly A L, Woodhead M, Coates P D, Barnwell D, and Martin K, In-Process Rheometry Studies of Low Density Polyethylene Compounds Part I: Unfilled Resin, Int.Poly.Process, XV No 4, 355-360 (2000)
J75
Kelly A L, Woodhead M, Coates P D, Barnwell D, and Martin K, In-Process Rheometry Studies of Low Density Polyethylene Compounds Part II: Magnesium Hydroxide Filled, Int.Poly.Process, XV No 4, 361-368 (2000)
2001
J76
Joseph R, Martyn M T, Tanner K E, Coates P D and Bonfield W, Rheological characterisation of hydroxyapatite filled polyethylene composites, part 1 – shear and extensional behaviour, Plast Rubb Comp, 30, No 5, 197-204 (2000)
J77
Joseph R, Martyn M T, Tanner K E, Coates P D and Bonfield W, Rheological characterisation of hydroxyapatite filled polyethylene composites, part 2 – isothermal compressibility and wall slip, Plast Rubb Comp, 30, No 5, 1205-212 (2000)
2002
J78
Sweeney J, Caton-Rose P and Coates P D, The modeling of large deformations of pre-oriented polyethylene, Polymer, 43., 89-907 (2002)
J79
Sweeney J, Collins T L D, Coates P D, Unwin A P, Duckett R A and Ward I M, Application of a large deformation model to unstable tensile stretching of polyethylene, Int J Plast., 18, 399-414 (2002)
J80
Joseph R., McGregor W.J., Martyn M.T., Tanner K.E., Coates P.D. and Bonfield W. Effect of Polymer Matrix on the Rheology of Hydroxyapatite Filled Polyethylene Composites, Polymer Engineering and Science, Vol 42(2) pp. 326-335 (2002)
J81
Unwin AP, Duckett RA, Ward IM, Collins TLD, Sweeney J, Coates PD, Suppression of necking in polyethylene, J.App.Polym.Sci, 86, 3135-3147 (2002)
J82
Joseph R, McGregor WJ, Martyn MT, Tanner KE, Coates PD, Effect of hydroxyapatite morphology/surface area on the rheology and processability of hydroxyapatite polyethylene composite, Biomaterials 23, 4295-4302, (2002)
J83
Unwin AP; Duckett RA; Ward IM; Collins TLD; Sweeney J; Coates PD, Suppression of necking in polyethylene, Journal of Applied Polymer Science, 86, 3135-3147, 2002
2003
J84
Smith GD; Brown EC; Barnwell D; Martin K; Coates Pd Use of ultrasound to determine variation of carbon dispersion in carbon black filled HDPE melts, Plast.Rubb.Compos.32; No 4, 167-172 (2003)
J85
Coates P.D, Barnes S.E., Sibley M.G., Brown E.C., Edwards H.G.M. and Scowen I.J., In-Process Vibrational Spectroscopy and Ultrasound Measurements in Polymer Melt Extrusion, Polymer, 44, 5937-5949 (2003)
J86
Bent, L. R. Hutchings, R. W. Richards, T. Gough, R. Spares, P. D. Coates, I. Grillo, O. G. Harlen, D. J. Read, R. S. Graham, A. E. Likhtman, D. J. Groves, T. M. Nicholson and T. C. B. McLeish, Neutron-Mapping Polymer Flow: Scattering, Flow visualization and Molecular Theory, Science, 301, 1691-1695 (2003)
J87
Whiteside B R, Martyn M T and Coates P D, Allan P S, Hornsby P R and Greenway G, Micromoulding: Process Characteristics and Product Properties , Plast.Rubb.Compos. 32, 231-239 (2003)
J88
Smith GD; Brown EC; Barnwell D; Martin K; Coates PD, Determination of filler concentration in magnesium hydroxide filled LDPE during extrusion, using ultrasound, Plastics, Rubber and Composites, 32(6), 248-256 (2003)
J89
Barnes SE, Sibley MG, Edwards HGM, Scowen IJ and Coates PD Applications of process spectroscopy to polymer melt processing. Spectroscopy Europe, Process Spectroscopy Column, vol. 15, no. 5, pp. 22-24 (2003).
2004
J90
Martyn MT, Spares R, Coates PD and Zatloukal M Visualisation and analysis of interfacial instability in the coextrusion of a LDPE melt. Plastics and Rubber Composites: Macromolecular Engineering, vol. 33, no. 1, pp. 27-35. (2004).
J91
Dawson AJ, Coates PD, Collis R, Owen L, Owen D and Rajamani H-S Injection moulding process assessment by energy monitoring. Plastics, Rubber and Composites: Macromolecular Engineering, vol. 33, no. 1, pp. 19-25, (2004).
J92
Whiteside BR, Martyn MT, Coates PD, Greenway G, Allan PS and Hornsby PR Micromoulding: process measurements, product morphology and properties. Plastics, Rubber and Composites: Macromolecular Engineering, vol. 33, no. 1, pp. 11-17, (2004).
J93
Hine PJ, Duckett RA, Caton-Rose P and Coates PD Fibre orientation structures and their effects on crack resistance of injection moulded transverse ribbed plate. Plastics, Rubbers and Composites: Macromolecular Engineering, vol. 33, no. 1, pp. 43-54, (2004). IoM3 Composites Prize, 2004
J94
Corrigan N; Harkin-Jones E; Brown E; Coates PD; Crawford RJ Development of reactive rotational moulding process, Plastics, Rubber and Composites 33(1), 37-42, (2004)
J95
Zatloukal M; Martyn MT; Coates PD; Vlcek J, Modelling of viscoelastic coextrusion flows in multi-manifold flat dies, Plastics, Rubber and Composites 33(7), 305-309, (2004)
J96
Brown EC; Kelly AL; Coates PD, Melt temperature field measurement in single screw extrusion using thermocouple meshes, Review of Scientific Instruments 75(11), 4742-4748 (2004)
J97
J Bent, LR Hutchings, RW Richards, T Gough, R Spares, PD Coates, I Grillo, OG Harlen, DJ Read, RS Graham, AE Likhtman, DJ Groves, TM Nicholson and TCB McLeish Neutron-mapping polymer flows for molecular polymer rheology. Macro 2004, 40th IUPAC World Polymer Congress, Paris, France. (2004).
2005
J98
Barnes SE; Brown EC; Sibley MG; Edwards HGM; Coates PD, Vibrational spectroscopic and ultrasound analysis for the in-process monitoring of poly(ethylene vinyl acetate) copolymer composition during melt extrusion, Analyst 130, 286-292 (2005)
J99
Sweeney J; Caton-Rose P; Coates PD, Modeling the large-strain constitutive behavior of polycarbonate under isothermal and anisothermal conditions, Journal of Applied Polymer Science, 96(6) 2105-2116 (2005)
J100
Kelly AL; Woodhead M; Coates PD, Comparison of injection molding machine performance, Polymer Engineering and Science, 45(6), 857-865 (2005)
J101
Barnes SE; Brown EC; Sibley MG; Edwards HGM; Scowen IJ; Coates PD, Vibrational spectroscopic and ultrasound analysis for the in-process characterization of high-density polyethylene/polypropylene blends during melt extrusion, Applied Spectroscopy 59(5), 611-619, (2005)
J102
Whiteside BR; Martyn MT; Coates PD, In-process monitoring of micromoulding-assessment of process variation, International Polymer Processing 20 (2), 162-169 (2005)
J103
Kelly AL; Rose RM; Spares R; Coates PD; Weston S, Recycling of uPVC window profile waste, Journal of Vinyl and Additive Technology 11(3), 119-126 (2005)
J104
Heeley EL; Gough T; Bras W; Gleeson AJ; Coates PD; Ryan AJ, Polymer processing: Using synchrotron radiation to follow structure development in commercial and novel polymer materials, Nuclear Instruments and Methods in Physics Research B: Beam Interactions with Materials and Atoms, 238, 21-27 (2005)
J105
Barnes SE, Brown EC, Corrigan N, Coates PD, Harkin-Jones E, Edwards HGM, Raman spectroscopic studies of the cure of dicyclopentadiene (DCPD), Spectrochimica Acta Part A 61, 2946-2952, (2005)
J106
E.L. Heeley, T. Gough, W. Bras, A.J. Gleeson, P.D. Coates, A.J. Ryan,
Polymer processing: Using synchrotron radiation to follow structure development in commercial and novel polymer materials, Nuclear Instruments and Methods in Physics Research B 238 (2005) 21–27
J107
R Joseph, MT Martyn, KE Tanner and PD Coates. Interfacial stick-slip in hydroxyapatite filled high density polyethylene. Poly. Eng. Sci. (2005) **
J108
Whiteside BR; Spares R; Howell K; Martyn MT and Coates PD Micromoulding: extreme process monitoring and inline product assessment, Plastics, Rubber and Composites 34(9), 380-386, (2005)
J109
Whiteside BR; Brown EC; Ono Y; Jen C-K and Coates PD Real-time ultrasonic diagnosis of polymer degradation and filling incompleteness in micromoulding, Plastics, Rubber and Composites 34(9), 387-392, (2005)
J108
Gough T; Spares R and Coates PD In-process measurements of full field stress birefringence and velocities in polymer melt flows, Plastics, Rubber and Composites 34(9), 393-402, (2005)
J109
Zatloukal M; Kopytko W; Saha P; Martyn M and Coates PD Theoretical and experimental investigations of interfacial instability phenomena occurring during viscoelastic coextrusion, Plastics, Rubber and Composites 34(9), 403-409, (2005)
J110
Kelly AL; Brown EC and Coates PD Melt temperature field measurement: influence of extruder screw and die geometry, Plastics, Rubber and Composites 34(9), 410-406, (2005)
J111
Hine P; Duckett RA; Caton-Rose P; Coates PD, Jittman P; Chapman C and Smith G
Fibre orientation: measurement, modelling and knowledge based design, Plastics, Rubber and Composites 34(9), 417-424, (2005)
2006
J112
Olley P, Mulvaney-Johnson L and Coates PD Non-isothermal experimental and simulation study of residual wall thickness in gas assisted injection moulding, Plastics, Rubber and Composites 35(2), 47-58, (2006)
J113
Joesph Roy; Martyn MT; Tanner KE and Coates PD Interfacial stick-slip transition in hydroxyapatite filled high density polyethylene composite, Bull. Mater. Sci., Vol. 29, No. 1, 85-89, (2006)
J114
RS Graham, J Bent, LR Hutchings, RW Richards, DJ Groves, J Embery, TM Nicholson, TCB McLeish, AE Likhtman, OG Harlen, DJ Read, T Gough, R Spares, PD Coates, I Grillo, Measuring and predicting the dynamics of linear monodisperse entangled polymers in rapid flow through an abrupt contraction. A small angle neutron scattering study, Macromolecules, 39 2700-2709 (2006)
J115
Olley P, Mulvaney-Johnson L, Coates PD, Non-isothermal experimental and simulation study of residual wall thickness in gas assisted injection moulding Plastics, Rubber and Composites 35(2) 47-58 1465-8011
PD Coates, BR Whiteside, MT Martyn, R Spares and T Gough, Micromoulding – precision processing for controlled structure products. Proceedings of Second International Conference on Multi Material Micro Manufacture, 4M- 2006, Grenoble, France, September 2006.
J116
AL Kelly, EC Brown, PD Coates The effect of screw geometry on melt temperature profile in single screw extrusion, Polymer Engineering and Science 46(12) 1706-1714 0032-3888 (2006)
2007
J117
L Mulvaney-Johnson, CC Cheng, Y Ono, EC Brown, CK Jen, PD Coates Real time diagnostics of gas/water assisted injection moulding using integrated ultrasonic sensors Plastics, Rubber and Composites 36(3) 111-1211465-8011(2007)
J118
CC Cheng, Y Ono, BD Whiteside, EC Brown, CK Jen, PD Coates Real-time diagnosis of micro powder injection molding using integrated ultrasonic sensors International Polymer Processing 12(2) 140-145, 0930-777X (2007)
J119
Y. Ono, B.R. Whiteside, E.C. Brown, M. Kobayashi, C.-C. Cheng, C.-K. Jen and P.D. Coates, Real-time process monitoring of micromoulding using integrated ultrasonic sensors, Transactions of the Institute of Measurement and Control, 29, 383-401 (2007)
J120
Sweeney J, Spares R, Caton-Rose P and Coates P D A unified model of necking and shearbanding in amorphous and semicrystalline polymers Journal of Applied Polymer Science 106 1095-1105 08/07/2007 10974628 3.027
2008
J121
Spencer PE; Spares R; Sweeney J; Coates PD Modelling the large strain solid phase deformation behaviour of polymer nanoclay composites 12(4), 313-327; 1385-2000, Mechanics of Time-Dependent Materials, 2008
J122
Gough T; Spares R; Kelly AL; Brook SM; Coates PD Three-dimensional characterisation of full field stress and velocity fields for polyethylene melt through abrupt contraction 37(2/3/4), 158-165, 1465-8011, Plastics, Rubber and Composites, 2008
J123
Kelly AL; Brown EC; Howell K; Coates PD Melt temperature field measurements in extrusion using thermocouple meshes 37(2/3/4), 151-157, 1465-8011, Plastics, Rubber and Composites, 2008
2009
J124
Sweeney J; Naz S; Coates PD Viscoplastic constitutive modeling of polymers - flow rules and the plane strain response 111 1190-1198 0021-1995 Journal of Applied Polymer Science , 2009
J125
Martyn MT; Spares R; Coates PD; Zatloukal M Imaging and anlaysis of wave type interfacial instability in the coextrusion of low-density polyethylene melts 156 150-164 0377-0257 Journal of Non-Newtonian Fluid Mechanics , 2009
J126
Villanueva MP; Cabedo L; Gimenez E; Lagaron JM; Coates PD; Kelly AL Study of the dispersion of nanoclays in a LDPE matrix using microscopy and in-process ultrsonic monitoring 28 277-287 0142-9418 Polymer Testing , 2009
J127
Paradkar A; Kelly A; Coates P; York P Shear and extensional rheology of hydroxypropyl cellulose melt using capillary rheometry 49 304-310 0731-7085 Journal of Pharmaceutical and Biomedical Analysis, , 2009
J128
Kelly AL; Gough T; Whiteside BR; Coates High shear strain rate rheometry of polymer melts 114 864-873 0021-1995 Journal of Applied Polymer Science, , 2009
J129
Xie, S., Harkin-Jones, E., Shen Y., Hornsby, P., McAfee, M., McNally, T., Benkreira, H., and Coates, P, Quantitative characterization of clay dispersion in polypropylene-clay nanocomposites by combined transmission electron microscopy and optical microscopy Materials Letters 64 (2)185 – 188 DOI: 10.1016/j.matlet.2009.10.042 (2009)
2010
J130
Naz S; Sweeney J; Coates PD Analysis of the essential work of fracture method as applied to UHMWPE, 45(2), 448-459, 0022-2461, Journal of Materials Science, 2010
J131
Zhan YH; Patel R; Lavorgna M; Piscitelli F; Khan A; Xia HS; Benkreira H; Coates P D Processing of polyurethane/carbon nanotubes composites using novel minimixer, 39 (9) 400- 410, 1465-8011, Plastics, Rubber and Composites: Macromolecular Engineering, 2010
J132
Li L; Mulvaney-Johnson L; Chen N; Wang Q; Coates PD Small scale injection moulding of modified poly(vinyl alcohol), 39 (9), 411- 418, 1465-8011, Plastics, Rubber and Composites: Macromolecular Engineering, 2010
J133
Dhumal, RS, Kelly, AL, York, P, Coates, PD, Paradkar, A Cocrystalization and Simultaneous Agglomeration using Hot Melt Extrusion, Pharmaceutical Research 27 2725-2733 DOI:10.1007/s11095-010-0273-9 (2010)
J134
Quantitative characterization of clay dispersion in polypropylene-clay nanocomposites by combined transmission electron microscopy and optical microscopy
Xie, S., Harkin-Jones, E., Shen, Y., Hornsby, P., McAfee, M., McNally, T., Patel, R., Benkreira, H., Coates, P., Materials Letters, volume 64, issue 2, year 2010, pp. 185 - 188